Alcatel-Lucent 7210 SAS M Configuration Manual page 72

CLI Environment Commands
CLI Environment Commands
alias
Syntax alias alias-name alias-command-line
no alias alias-name
Context environment
Description This command enables the substitution of a command line by an alias. Use the alias command to cre-
ate alternative or easier to remember/understand names for an entity or command string. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double
quotes. Only a single command can be present in the command string. The alias command can be
entered in any context but must be created in the root>environment context.
For example, to create an alias named soi to display OSPF interfaces, enter:
Parameters alias-name — The alias name. Do not use a valid command string for the alias. If the alias specified is
alias-command-line — The command line to be associated.
create
Syntax [no] create
Context environment
Description
By default, the create command is required to create a new OS entity.
The no form of the command disables requiring the create keyword.
Default
create — The create keyword is required.
more
Syntax [no] more
Context environment
Description
This command enables per-screen CLI output, meaning that the output is displayed on a screen-by-
screen basis. The terminal screen length can be modified with the terminal command.
The following prompt appears at the end of each screen of paginated output:
Press any key to continue (Q to quit)
The no form of the command displays the output all at once. If the output length is longer than one
screen, the entire output will be displayed, which may scroll the screen.
Page 72
alias soi "show router ospf interface"
an actual command, this causes the command to be replaced by the alias.
7210 SAS M, T, X, R6 Basic System Configuration Guide