Alcatel-Lucent 7210 SAS M Configuration Manual page 445

Show Commands
S C
YSTEM OMMANDS
connections
Syntax connections [address ip-address [interface interface-name]] [port port-number] [detail]
Context show>system
Description
This command displays UDP and TCP connection information.
If no command line options are specified, a summary of the TCP and UDP connections displays.
Parameters
ip-address — Displays only the connection information for the specified IP address.
port-number — Displays only the connection information for the specified port number.
detail — Appends TCP statistics to the display output.
Output
Standard Connection Output — The following table describes the system connections output
fields.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values ipv4-address:
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
Values 0 — 65535
Label
Proto
RecvQ
TxmtQ
Local Address
Remote Address
State
a.b.c.d (host bits must be 0)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
Displays the socket protocol, either TCP or UDP.
Displays the number of input packets received by the protocol.
the
Displays number of output packets sent by the application.
Displays the local address of the socket. The socket port is separated
by a period.
Displays the remote address of the socket. The socket port is separated
by a period.
Listen — The protocol state is in the listen mode.
Established — The protocol state is established.
System Management
Description
Page 445