Alcatel-Lucent 7210 SAS M Configuration Manual page 391

System Administration Commands
admin
Syntax admin
Context <ROOT>
Description
The context to configure administrative system commands. Only authorized users can execute the
commands in the admin context.
Default none
check-golden-bootstrap
Syntax check-golden-bootstrap
Context admin
Description
This command validates the current golden bootstrap image, and displays its version, if found to be
valid. If the golden bootstrap image is not found to be a valid, an error message is displayed to that
effect.
debug-save
Syntax debug-save file-url
Context admin
Description
This command saves existing debug configuration. Debug configurations are not preserved in
configuration saves.
Default
none
Parameters file-url — The file URL location to save the debug configuration.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values
file url:
local-url:
remote-url:
cflash-id:
usb-flash-id
local-url | remote-url: 255 chars max
[<cflash-id>/ | <usb-flash-id>][file-path], 200 chars max, including
the cflash-id directory length, 99 chars max each
[{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address]
ipv4-address a.b.c.d
255 chars max, directory length 99 chars max each
cf1:, cf2 (only on 7210 SAS-T)
uf1:
System Management
Page 391