Alcatel-Lucent 7210 SAS M Configuration Manual page 366

Date and Time Commands
lifetime
Syntax lifetime {seconds | forever}
Context config>cron>action
Description This command configures the maximum amount of time the script may run.
Parameters seconds — Specifies the maximum amount of time to keep the results from a script run.
forever — Specifies to keep the results from a script run forever.
max-completed
Syntax max-completed unsigned
Context config>cron>action
Description This command specifies the maximum number of completed sessions to keep in the event execution
log. If a new event execution record exceeds the number of records specified this command, the
oldest record is deleted.
The no form of this command resets the value to the default.
Parameters
unsigned — Specifies the maximum number of completed sessions to keep in the event execution log.
results
Syntax [no] results file-url
Context config>cron>action
Description
This command specifies the location where the system writes the output of an event script's
execution.
The no form of this command removes the file location from the configuration.
Parameters file-url — Specifies the location where the system writes the output of an event script's execution.
Page 366
Guide
Values 1 — 21474836
Default
3600 (1 hour)
Values
0 — 255
Default 1
Values
file url:
local-url:
remote-url:
7210 SAS M, T, X, R6 Basic System Configuration
local-url | remote-url: 255 chars max
[<cflash-id>/ |<usb-flash-id>/][<file-path>]
[{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address]
ipv4-address a.b.c.d