System Information Commands
alarms. 7210 SAS retrieves any information about the equipped module to aid the user with
provisioning.
The no form of the command removes and clears the card-type information. Until the card-type is
provisioned, the 7210 SAS software does not raise any events/traps/alarms for the card and clear all
pending events/traps/alarms/LEDs.
Default
No default
Parameters
card-type — Identifier used to match the configured slot module with the equipped slot module. The
Table 29
usable with the clip-on device.
The following table lists the acronyms defined by the optical group. For more information, see the
Product overview guide for 1830 VWM. This is used to pre-provision the acceptable modules that can
be equipped in the slots of the clip-on device.
Table 29: Card Type acronyms defined by the optical group
Page 338
Guide
below provides the list of acronyms that can be used to identify the supported modules
Values
SFC1A|SFC1B|SFC1C|SFC1D|SFC1E|SFC1F|SFC1G|SFC1H|SFC2A&B|SFC2C&D|S
FC2E&F|SFC2G&H|SFC4A-D|SFC4E-H|SFC8
ascii-string - can use ASCII alphabets or numbers. Valid card-type acronyms is
listed in the table below.
Module Description
1830 VWM 1-CH CWDM FILTER
(AB VARIANT) - CH1 (1471nm)
1830 VWM 1-CH CWDM FILTER
(AC VARIANT) - CH1 (1491nm)
1830 VWM 1-CH CWDM FILTER
(AD VARIANT) - CH1 (1511nm)
1830 VWM 1-CH CWDM FILTER
(AE VARIANT) - CH1 (1531nm)
1830 VWM 1-CH CWDM FILTER
(AF VARIANT) - CH1 (1551nm)
1830 VWM 1-CH CWDM FILTER
(AG VARIANT) - CH1 (1571nm)
1830 VWM 1-CH CWDM FILTER
(AH VARIANT) - CH1 (1591nm)
1830 VWM 1-CH CWDM FILTER
(AI VARIANT) - CH1 (1611nm)
7210 SAS M, T, X, R6 Basic System Configuration
Acronym
SFC1A
SFC1B
SFC1C
SFC1D
SFC1E
SFC1F
SFC1G
SFC1H