Alcatel-Lucent 7210 SAS M Configuration Manual page 172

File Management Commands
secondary-config
Syntax secondary-config file-url
no secondary-config
Context bof
Description This command specifies the name and location of the secondary configuration file.
The system attempts to use the configuration as specified in secondary-config if the primary config
cannot be located. If the secondary-config file cannot be located, the system attempts to obtain the
configuration from the location specified in the tertiary-config.
Note that if an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the secondary-config configuration.
Default
none
Parameters file-url — The secondary configuration file location, expressed as a file URL.
secondary-image
Syntax secondary-image file-url
no secondary-image
Context bof
Description This command specifies the secondary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If this
fails, the system attempts to load the runtime images from the location configured in the secondary-
image. If the secondary image load fails, the tertiary image specified in tertiary-image is used.
The no form of the command removes the secondary-image configuration.
Default
none
Parameters file-url — The file-url can be either local (this local flash) or a remote FTP server.
Page 172
Values
file-url
local-url
remote-url
cflash-id
usb-flash-id
Values
file-url
local-url
remote-url
cflash-id
usb-flash-id
7210 SAS M, T, X, R6 Basic System Configuration
[local-url | remote-url] (up to 180 characters)
[<cflash-id/> | <usb-flash-id>][file-path]
[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cf1:, cf2 (only on 7210 SAS-T and 7210 SAS-R6)
uf1:
[local-url | remote-url] (up to 180 characters)
[<cflash-id/> | <usb-flash-id>][file-path]
[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cf1:, cf2 (only on 7210 SAS-T and 7210 SAS-R6)
uf1: