Alcatel-Lucent 7210 SAS M Configuration Manual page 426

System Resource-Profile Commands
g8032-control-sap-tags
Syntax [no] g8032-control-sap-tags vlan-range
Context configure>system>resource-profile
Platforms supported: 7210 SAS-R6
Description
Allows user to configure the range of VLANs per IMM to be used internally with G8032 MEPs
which support hardware CCM message processing.
NOTE: User must ensure that the VLANs configured for use with G8032 MEPs is not configured for
any of the SAPs configured on the IMM.
User can use one of the VLANs configured with this command to configure the VLAN for the G8032
mep configure> eth-ring> path> control-sap-tag.
Default
no g8032-control-sap-tags
Parameters
ingress-internal-tcam
Syntax ingress-internal-tcam
Context configure>system>resource-profile
Description
This command provides the context to allocate ingress internal TCAM resources.
acl-sap-ingress
Syntax [no] acl-sap-ingress
Context configure>system>resource-profile>ingress-internal-tcam
Description This command allows the user to allocate maximum resources for use by ingress filter policies using
any of the supported match criteria. This command limits the total amount of chunks allocated for use
by ingress filter policies to the value specified by num-resources. In other words, the cumulative sum
of chunks allocated to different match criteria supported by ingress filter policies cannot exceed the
value configured with num-resources.
With the no form of the command, software does not allocate any resources for use by filter policies.
If no resources are allocated for use, then the software fails all attempts to associate a service entity
(For example: SAP, IP interface, etc.) with a filter policy using any of the match criteria.
Parameters
num-resources — Specifies the amount of resources that can be allocated for use by ACL policies.
Page 426
Guide
Values [3000..3512] - [3000..3512]
7210 SAS M, T, X, R6 Basic System Configuration