Alcatel-Lucent 7210 SAS M Configuration Manual page 60

Global Commands
'A' indicates user is in admin mode
===============================================================================
A:ALA-1#
A:ALA-1#
MINOR: CLI Already in admin mode.
A:ALA-1#
back
Syntax back
Context <GLOBAL>
Description This command moves the context back one level of the command hierarchy. For example, if the cur-
rent level is the config router ospfconfig router interface interface-id context, the back command
moves the cursor to the config router context level.
clear
Syntax clear
Context <GLOBAL>
Description
This command clears statistics for a specified entity or clears and resets the entity.
Parameters cron — Clears CRON history.
filter — Clears IP (ipv4 and ipv6), MAC, and log filter counters.
lag — Clears LAG-related entities.
log — Closes and reinitializes the log specified by log-id.
port — Clears port statistics.
qos — Clears QoS statistics.
radius — Clears the RADIUS server state.
router — Clears router commands affecting the router instance in which they are entered.
saa — Clears the SAA test results.
screen — Clears the console or telnet screen.
service — Clears service ID and statistical entities.
system — Clears (re-enables) a previously failed reference.
tacplus — Clears the TACACS+ server state.
trace — Clears the trace log.
Page 60
enable-admin
Values arp, authentication, bfd, dhcp, forwarding-table, icmp-redirect-route, interface, isis,
ldp, mpls, ospf, rip, rsvp
7210 SAS M, T, X, R6 Basic System Configuration Guide