Service Management Tasks; System Administration Commands; Viewing The Current Configuration - Alcatel-Lucent 7210 SAS M Configuration Manual

Service Management Tasks

Service Management Tasks
This section discusses the following service management tasks:
•

System Administration Commands

Use the following administrative commands to perform management tasks.
CLI Syntax: A:ALA-1# admin

Viewing the Current Configuration

Use one of the following CLI commands to display the current configuration. The
displays all default values. The
command displays context-level information.
CLI Syntax: admin# display-config [detail|index]
The following displays an example of a configuration file:
*A:sim169# admin display-config
# TiMOS-B-0.0.I218 both/i386 ALCATEL SAS-M 7210 Copyright (c) 2000-2008 Alcatel-
Lucent.
# All rights reserved. All use subject to applicable license agreements.
# Built on Fri Sep 26 20:46:58 IST 2008 by panosbld in /panosbld/ws/panos/main
Page 156
System Administration Commands on page 156
→
Viewing the Current Configuration on page 156
→
Modifying and Saving a Configuration on page 158
→
Deleting BOF Parameters on page 159
→
Saving a Configuration to a Different Filename on page 161
check-golden-bootstrap
debug-save [<file-url>]
disconnect [address <ip-address> | username <user-name> |
{console|telnet|ftp|ssh}]
display-config
[no]enable-tech
reboot [upgrade][auto-init][now]
save [file-url] [detail] [index]
set-time <date> <time>
tech-support <file-url>
update-golden-bootstrap [file-url]
info detail
7210 SAS M, T, X, R6 Basic System Configuration Guide
option displays only the persistent indices. The
index
option
detail
info