Alcatel-Lucent 7210 SAS M Configuration Manual page 179

eth-mgmt-autoneg
Syntax [no] eth-mgmt-autoneg
Context bof
Description This command enables speed and duplex Auto-negotiation on the management Ethernet port in the
running configuration and the Boot Option File (BOF).
The no form of the command disables the Auto-negotiate feature on this port.
Default
eth-mgmt-autoneg — Auto-negotiation is enabled on the management Ethernet port.
eth-mgmt-disabled
Syntax [no] eth-mgmt-disabled
Context bof
Description This command allows the user to enable or disable the out-of-band management Ethernet port for use
during boot up.
The no form of the command enables the port.
Default
eth-mgmt-disabled
eth-mgmt-duplex
Syntax eth-mgmt-duplex {full | half}
Context bof
Description
This command configures the duplex mode of the management Ethernet port when Auto-negotiation
is disabled in the running configuration and the Boot Option File (BOF).
This configuration command allows for the configuration of the duplex mode of the Ethernet port. If
the port is configured to Auto-negotiate, this parameter will be ignored.
Default
eth-mgmt-duplex full — Full duplex operation.
Parameters
full — Sets the link to full duplex mode.
half — Sets the link to half duplex mode.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values
Values
x - [0..FFFF]H
d - [0..255]D
ipv4-prefix-length 0 — 32
ipv6-prefix-length 0 — 128
Boot Option Files
Page 179