Alcatel-Lucent 7210 SAS M Configuration Manual page 501

===============================================================================
*A:SAST>show#
alarm-contact-input
Syntax alarm- contact-input all
Context show>alarm-contact-input
Description
This command displays information of all the alarm contact input pins.
Output alarm-contact-input Output — The following table describes alarm-contact-input output fields.
Sample Output
*A:7210-2# show alarm-contact-input 1
===============================================================================
Alarm Contact Input
===============================================================================
===============================================================================
*A:7210-2#
*A:7210-2# show alarm-contact-input 1 detail
===============================================================================
Alarm Contact Input
===============================================================================
===============================================================================
*A:7210-2#
7210 SAS M, T, X, R6 Basic System Configuration Guide
Configured power supply type
Status
Label
Alarm input pin Number
Alarm input pin Descrip-
tion
Alarm input pin current
state
Alarm output pin used
Last state change time
Alarm Input Pin Number
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used
Alarm Input Pin Number
Alarm Input Pin Description
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used
Last State Change
: none
: not equipped
Description
Indicates the pin alarm input pin number.
Describes the alarm indicating its usage or attribute.
Indicates the current state of the alarm contact input
pin.
Indicates the alarm output pin used.
Indicates the previous state change time.
: 1
: Major
: 1
:
: Major
: 05/19/2010 11:28:09
System Management
Page 501