Configuring Backup Copies - Alcatel-Lucent 7210 SAS M Configuration Manual

Common Configuration Tasks

Configuring Backup Copies

The
config-backup
of configuration and index files kept in the primary location.
For example, assume the config-backup count is set to 5 and the configuration file is called
xyz.cfg. When a save command is executed, the file xyz.cfg is saved with a .1 extension. Each
subsequent config-backup command increments the numeric extension until the maximum count
is reached. The oldest file (5) is deleted as more recent files are saved.
Each persistent index file is updated at the same time as the associated configuration file. When
the index file is updated, then the save is performed to xyz .cfg and the index file is created as
xyz.ndx. Synchronization between the active and standby is performed for all configurations and
their associated persistent index files.
CLI Syntax: config>system
Example
The following example shows the
A:ALA-12>config>system>time# info
#------------------------------------------
echo "System Configuration"
#------------------------------------------
...
----------------------------------------------
A:ALA-12>config>system>time#
Page 284
command allows you to specify the maximum number of backup versions
xyz.cfg
xyz.cfg.1
xyz.cfg.2
xyz.cfg.3
xyz.cfg.4
xyz.cfg.5
xyz.ndx
config-backup count
:
config>system#
m#
config>syste
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
config-backup 7
7210 SAS M, T, X, R6 Basic System Configuration Guide
config-backup 7
configuration.
config-backup