Alcatel-Lucent 7210 SAS M Configuration Manual page 192

Show Commands
boot-messages
Syntax boot-messages
Context show
Description This command displays boot messages generated during the last system boot.
Output Show Boot Messages Fields — The following output shows boot message output fields.
Sample Output
===============================================================================
cf1:/bootlog.txt
===============================================================================
Bootlog started for Version V-0.0.I317
Build V-0.0.I317 bootrom/mpc 7xxx
Built on Tue Jan 6 02:23:14 IST 2009 by panosbld in /panosbld/ws/panos/main
?Attempting to load from file cf1:/boot.tim
Version L-0.0.I312, Fri Jan
main
text:(3002475-->12623392) + data:(550940-->2414128)
Starting at 0xb000000...
Total Memory: 512MB
TiMOS-L-0.0.I312 boot/mpc ALCATEL SAS-M 7210 Copyright (c) 2000-2009 Alcatel-Lucent.
All rights reserved. All use subject to applicable license agreements.
Built on Fri Jan 2 04:26:32 IST 2009 by panosbld in /panosbld/ws/panos/main
TiMOS BOOT LOADER
Extended checks enabled with overhead of 36B
Time from clock is THU JAN 08 16:04:05 2009 UTC
Switching serial output to sync mode...
Looking for cf1:/bof.cfg ... OK, reading
Contents of Boot Options File on cf1:
12/STU-sultan/both.tim
#uplinkA Port Settings:
#uplinkB Port Settings:
#System Settings:
Hit a key within 1 second to change boot parms...
Page 192
Chassis Type: sas
primary-image ftp://*:*@192.168.170.22/import/panos_nightly_builds/1.0/B1-
primary-config cf1:\config.cfg
uplinkA-port 1/1/13
uplinkA-address 10.135.17.246/24
uplinkA-vlan null
uplinkA-route 10.135.0.0/16 next-hop 10.135.17.1
uplinkA-route 192.168.0.0/16 next-hop 10.135.17.1
uplinkB-port 1/1/2
uplinkB-address 0
uplinkB-vlan 0
wait 3
persist off
console-speed 115200
7210 SAS M, T, X, R6 Basic System Configuration Guide
2 04:26:32 IST 2009 by panosbld in /panosbld/ws/panos/
Card Type: badami_7210
done