Alcatel-Lucent 7210 SAS M Configuration Manual page 409

revert
Syntax revert checkpoint | rescue [now]
Context admin>rollback
Description Platforms Supported: 7210 SAS-R6.
This command initiates a configuration rollback revert operation that will return the configuration
state of the node to a previously saved checkpoint. The rollback revert minimizes impacts to running
services. There are no impacts in areas of configuration that did not change since the checkpoint.
Configuration parameters that changed (or items on which changed configuration have dependencies)
are first removed (revert to default) and the previous values are then restored (can be briefly service
impacting in changed areas).
Parameters checkpoint — >Indicates the configuration to return to (which rollback checkpoint file to use).
rescue — Revert to the rescue checkpoint.
now — Forces a rollback revert without any interactive confirmations (assumes 'y' for any
view
Syntax view [checkpoint | rescue]
Context admin>rollback
Description
Platforms Supported: 7210 SAS-R6.
This command displays checkpoint..
Default
none
Parameters checkpoint — Indicates rollback checkpoint file to be viewed. Checkpoint of "1" corresponds to the
rescue — View the rescue configuration.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Checkpoint of "1" corresponds to the file-url.rb.1 rollback checkpoint file. The higher the id, the
older the checkpoint. Max is the highest rollback checkpoint supported or configured.
Values
1—max, where max is the number of configured checkpoints minus 1 (since, for
example, the 10th checkpoint has an id of 9)
confirmations that would have occurred).
file-url.rb.1 rollback checkpoint file. The higher the id, the older the checkpoint. Max is the
highest rollback checkpoint supported or configured.
Values
1..max
System Management
Page 409