non-std-zone-name — The non-standard time zone name.
hh [:mm] — The hours and minutes offset from UTC time, expressed as integers. Some time zones
7210 SAS M, T, X, R6 Basic System Configuration Guide
defined time zones have implicit summer time settings which causes the switchover to summer
time to occur automatically; configuring the dst-zone parameter is not required.
A user-defined time zone name is case-sensitive and can be up to 5 characters in length.
Values
A user-defined value can be up to 4 characters or one of the following values:
MT,WET,CET,EET,MSK,MSD,AST,NST,EST,CST,MST,PST,HST,AKST,AWST,
ACST,AEST,NZST,UTC
Values
Up to 5 characters maximum.
do not have an offset that is an integral number of hours. In these instances, the minutes-offset
must be specified. For example, the time zone in Pirlanngimpi, Australia UTC + 9.5 hours.
Default
hours: 0
minutes: 0
Values
hours: -11 — 12
minutes: 0 — 59
System Management
Page 383