Alcatel-Lucent 7210 SAS M Configuration Manual page 456

System Commands
Page 456
Label
System Up Time
SNMP Port
SNMP Engine ID
SNMP Max Message
Size
SNMP Admin State
SNMP Oper State
SNMP Index Boot
Status
Telnet/SSH/FTP
Admin
Telnet/SSH/FTP
Oper
BOF Source
Image Source
Config Source
Last Booted Config
File
Last Boot Cfg Ver-
sion
Last Boot Config
Header
7210 SAS M, T, X, R6 Basic System Configuration Guide
Description (Continued)
The time since the last boot.
The port number used by this node to receive SNMP request messages
and to send replies.
The SNMP engineID to uniquely identify the SNMPv3 node.
The maximum SNMP packet size generated by this node.
Enabled — SNMP is administratively enabled and running.
Disabled — SNMP is administratively shutdown and not running.
Enabled — SNMP is operationally enabled.
Disabled — SNMP is operationally disabled.
Persistent — System indexes are saved between reboots.
Not Persistent — System indexes are not saved between
reboots.
Displays the administrative state of the Telnet, SSH, and FTP sessions.
Displays the operational state of the Telnet, SSH, and FTP sessions.
The location of the BOF.
Primary — Indicates that the directory location for runtime image
file was loaded from the primary source.
Secondary — Indicates that the directory location for runtime
image file was loaded from the secondary source.
Tertiary — Indicates that the directory location for runtime image
file was loaded from the tertiary source.
Primary — Indicates that the directory location for configuration
file was loaded from the primary source.
Secondary — Indicates that the directory location for configuration
file was loaded from the secondary source.
Tertiary — Indicates that the directory location for configuration
file was loaded from the tertiary source.
The URL and filename of the last loaded configuration file.
The date and time of the last boot.
Displays header information such as image version, date built, date
generated.