Alcatel-Lucent 7210 SAS M Configuration Manual page 379

scheduler-policy
Syntax [no] scheduler-policy scheduler-policy-name [time-range time-range-name] [priority
priority]
Context config>cron>tod-suite>egress
config>cron>tod-suite>ingress
Description
This command creates time-range based associations of previously created scheduler policies.
Multiple policies may be included and each must be assigned a different priority; in case time-ranges
overlap, the priority will be used to determine the prevailing policy. Only a single reference to a
policy may be included without a time-range.
Parameters scheduler-policy-name — Specifies a scheduler policy for this tod-suite.
time-range time-range-name — Specifies the name for a time-range. If the time-range is not
priority priority — Specifies the time-range priority. Only one time-range assignment of the same
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values Up to 32 characters
populated the system will assume the assignment to mean "all times". Only one entry without a
time-range is allowed for every type of policy. The system does not allow the user to specify
more than one policy and the same time-range and priority.
Values Up to 32 characters
type and priority is allowed.
Values
1 — 10
System Management
Page 379