Alcatel-Lucent 7210 SAS M Configuration Manual page 261

Location
Use the
city, building address, floor, room number, etc., where the router is located.
Use the following CLI syntax to configure the location:
CLI Syntax: config>system
Example
CLLI Code
The Common Language Location Code (CLLI code) is an 11-character standardized geographic
identifier that is used to uniquely identify the geographic location of a router.
Use the following CLI command syntax to define the CLLI code:
CLI Syntax: config>system
Example
7210 SAS M, T, X, R6 Basic System Configuration Guide
command to specify the system location of the device. For example, enter the
location
location location
:
config>system# location "Bldg.1-floor 2-Room 201"
clli-code
:
config>system# clli-code abcdefg1234
clli-code
System Management
Page 261