Alcatel-Lucent 7210 SAS M Configuration Manual page 452

System Commands
schedule
Syntax schedule [schedule-name] [owner schedule-owner]
Context show>cron#
Description This command displays cron schedule parameters.
Parameters schedule-name — Displays information for the specified scheduler name.
owner schedule-owner — Displays information for the specified scheduler owner.
Output The following table describes the show cron schedule output fields.
A:sim1>show>cron schedule test
Page 452
Label
Schedule name
Schedule owner
Description
Administrative
status
Operational sta-
tus
Action
Action owner
Script
Script owner
Script owner
Script source
location
Script results
location
Schedule type
Interval
7210 SAS M, T, X, R6 Basic System Configuration Guide
Displays the schedule name.
Displays the owner name of the action.
Displays the schedule's description.
Enabled — The administrative status is enabled.
Disabled — Administratively disabled.
Enabled — The operational status is enabled.
Disabled — Operationally disabled.
Displays the action name
Displays the name of action owner.
Displays the name of the script.
Displays the name of the script.
Displays the name of the of script owner.
Displays the location of scheduled script.
Displays the location where the script results have been sent.
Periodic — Displays a schedule which ran at a given interval.
Calendar — Displays a schedule which ran based on a calendar.
Oneshot — Displays a schedule which ran one time only.
Displays the interval between runs of an event.
Description