Alcatel-Lucent 7210 SAS M Configuration Manual page 416

LLDP System Commands
tx-hold-multiplier
tx-hold-multiplier multiplier
Syntax
no tx-hold-multiplier
Context config>system>lldp
Description This command configures the multiplier of the tx-interval.
Parameters
multiplier — Specifies the multiplier of the tx-interval.
tx-interval
Syntax tx-interval interval
no tx-interval
Context config>system>lldp
Description
Parameters
interval — Specifies the LLDP transmit interval time.
Page 416
Guide
Values 2 — 10
Default
4
This command configures the LLDP transmit interval time.
Values
5 —32768
Default
30
7210 SAS M, T, X, R6 Basic System Configuration