Alcatel-Lucent 7210 SAS M Configuration Manual page 113

repair
Syntax
Context
Description
Parameters
scp
Syntax
Context
Description
Parameters
7210 SAS M, T, X, R6 Basic System Configuration Guide
rf — The parameter forces a recursive delete.
force — Forces an immediate deletion of the specified directory.
For example, rd file-url force executes the command without displaying a user prompt message.
repair [cflash-id]
file
This command checks a compact flash device for errors and repairs any errors found.
cflash-id — Specify the compact flash slot ID to be shut down or enabled. When a specific cflash-id
is specified, then that drive is shutdown. If no cflash-id is specified, the drive referred to by the cur-
rent working directory is assumed.
Default
The current compact flash device.
Values
cf1:, cf2:\ (only on 7210 SAS-T), uf1:
scp local-file-url destination-file-url [router router-instance] [force]
file
This command copies a local file to a remote host file system. It uses ssh for data transfer, and uses
the same authentication and provides the same security as ssh. The following prompt appears:
"Are you sure (y/n)?" The destination must specify a user and a host.
local-file-url — The local source file or directory.
Values
[cflash-id/][file-path]: Up to 256 characters.
destination-file-url — The destination file.
Values
user@hostname:destination-file
user — The SSH user.
host — The remote host IP address of DNS name.
file-path — The destination path.
router-instance — Specify the router name or service ID.
Values
router-name:
service-id:
usb-flash-id - uf1:
Base , management
1 — 2147483647
Configuration Commands
Page 113