Alcatel-Lucent 7210 SAS M Configuration Manual page 110

File Commands
file
Syntax
Context
Description
md
Syntax
Context
Description
Page 110
Use the file-url with the optional wildcard (*) to reduce the number of files to list.
sort-order { d | n | s } — Specifies the sort order.
Values
d — date
n — name
s — size
reverse — Specifies to reverse the sort order.
Default Lists all files in the present working directory
file
root
The context to enter and perform file system operations. When entering the file context, the prompt
changes to reflect the present working directory. Navigating the file system with the cd .. command
results in a changed prompt.
The exit all command leaves the file system/file operation context and returns to the <ROOT> CLI
context. The state of the present working directory is maintained for the CLI session. Entering the file
command returns the cursor to the working directory where the exit command was issued.
md file-url
file
This command creates a new directory in a file system.
7210 SAS M, T, X, R6 Basic System Configuration Guide
[<file-path>]
remote-locn - [ <hostname> | <ipv4-address> |
"["<ipv6-address>"]" ]
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cflash-id - cf1:, cf2:\ (only on 7210 SAS-T)
usb-flash-id - uf1: