Alcatel-Lucent 7210 SAS M Configuration Manual page 408

Rollback Commands
remote-max-checkpoints
Syntax remote-max-checkpoints <1..200>
Context config>system>rollback
Description
Platforms Supported: 7210 SAS-R6.
Configures the maximum number of rollback checkpoint files when the rollback-location is remote
(For example: ftp).
Default
10
local-max-checkpoints
Syntax local-max-checkpoints <1..50>
Context config>system>rollback
Description
Platforms Supported: 7210 SAS-R6.
Configures the maximum number of rollback checkpoint files when the rollback-location is on local
compact flash.
Default
10
save
Syntax save [comment comment] [rescue]
Context admin>rollback
Description
Platforms Supported: 7210 SAS-R6.
If the optional "rescue" keyword is not used, this command saves a rollback checkpoint at the
location and with the filename specified by the rollback-location with a suffix of ".rb". The
previously saved checkpoints will have their suffixes incremented by one (.rb.1 becomes .rb.2, etc). If
there are already as many checkpoint files as the maximum number supported, then the last
checkpoint file is deleted.
If the "rescue" keyword is used, then this command saves the current operational configuration as a
rescue configuration at the location and with the filename specified by the rescue-location. The
filename will have the suffix ".rc" appended.
Default
none
Parameters
comment — A comment of up to 255 characters in length that is associated with the checkpoint.
rescue — Save the rescue checkpoint instead of a normal rollback checkpoint.
Page 408
Guide
7210 SAS M, T, X, R6 Basic System Configuration