Canon iR C3200 Series Service Manual page 186

Chapter 5
D:
1) Replace the main controller (main) board.
2) Mount the image memory (SDRAM) and the boot ROM (removed from the previous board) to the new board.
E:
1) ** Start up in save mode (i.e., turn on the main power while holding down the 2 and 8 keys.)
2) Execute HDD formatting using the SST (ALL); then, download the system software (SYSTEM, LANG, RUI).
3) Turn off and then on the main power.
F:
1) ** Replace the HDD, and start up in safe mode (i.e., turn on the main power while holding down on the 2 and 8
keys).
2) Using the SST, format the HDD (ALL) and download the system software (SYSTEM, LANG, RUI).
3) Turn off and then on the main power.
G:
1) Set '1' to the following: COPIER>FUNCTION>SYSTEM>CHK-TYPE.
2) Execute the following: COPIER>FUNCTION>SYSTEM>HD-CLEAR. (Make these selections, and press the OK
key.)
3) Turn off and then on the main power.
H:
1) Turn off the main power, and turn on the main power while pressing the 1 and 9 keys. (In response, the machine
will automatically start its recovery program*, and the control panel will turn completely black.)
2) When the screen has turned white, turn off and then on the main power.
If the recovery program fails to start in response, go to E.
* It will take about 30 to 50 min.
** As necessary, ask the user to make a backup of the address book, transfer, and user mode data using the RUI.
- HDD Format
Partition
DOSDEV
FSTDEV
DOSDEV2
FSTPDEV
DOSDEV3
PDLDEV
5-12
T-5-8
CHK- Data items that will be lost
TYPE
1 all relating to images (e.g., reservations, Box,
Fax); mode memory, routine task button
2 PDL spool
3 PDL-related file (e.g., font, registration form,
ICCProfile)