Chapter 9: Rack-mount and ground PRI
This chapter contains information about the following topics:
•
Introduction
on page 53
•
Rack-mount a PRI Gateway
•
Ground a PRI Gateway
Introduction
This chapter contains the procedures for mounting components into the customer-supplied,
480 mm (19 in.) rack.
This chapter contains the following procedures:
•
Rack-mounting a PRI Gateway
•
Grounding PRI Gateway components
For more information about the layout of an Avaya Communication Server 1000E (Avaya CS
1000E) equipment rack, see Avaya Communication Server 1000E Installation and
Commissioning (NN43041–310).
Rack-mount a PRI Gateway
To install the PRI Gateway in a 480 mm (19 in.) rack, the following items are required:
• equipment layout plan
• a 480 mm (19 in.) rack
Important:
The 480 mm (19 in.) rack is a customer supplied item.
• four .216 - 24 X .500 STL 289A screws (code P097F813)
Media Gateway 1000E PRI Gateway Installation and Commissioning
Gateway components
on page 53
on page 54
on page 54
on page 54
March 2013
53