Rtr And Object Tracking Configuration Examples; Example - Tracking A Single Remote Device - Avaya G250 Administration

Configuring WAN interfaces

RTR and object tracking configuration examples

The following sections provide examples object tracking configuration.
Example — tracking a single remote device
The following example illustrates tracking of a single remote device.
Figure 19: Tracking a single remote device
Avaya GW
G350
To track a single remote device:
1. The first step is to configure an RTR which tracks a remote device. In this case, RTR 5 is
configured to track the device at IP address 10.0.0.1:
G350-001(config)# rtr 5
G350-001(config-rtr 5)# type echo protocol ipIcmpEcho 10.0.0.1
G350-001(config-rtr icmp 5)# wait-interval 2 seconds
Done!
G350-001(config-rtr icmp 5)# fail-retries 3
Done!
G350-001(config-rtr icmp 5)# success-retries 1
Done!
G350-001(config-rtr icmp 5)# exit
G350-001(config)# rtr-schedule 5 start-time now life forever
2. The second step is to configure an object tracker which tracks the state of RTR 5:
G250-001(config)# track 1 rtr 5
G250-001(config-track rtr 1)# description "track rtr-5"
Done!
G250-001(config-track rtr 1)# exit
178 Administration for the Avaya G250 and Avaya G350 Media Gateways
IP Address: 10.0.0.1