Table of Contents
Advertisement
Installing Hardware for the G150 Media Gateway
Site Verification
A pre-installation site inspection allows you to verify that the site requirements have been met
for adequate environmental conditions, power and grounding availability, safety, and security
conditions. If you find discrepancies between the specifications necessary for proper installation
of equipment and the conditions on site, contact your Project Manager before proceeding with
the installation.
Unpack and Check the Order
Cross-check your customer's order with the planning documentation you have been given.
Verify that all necessary elements have been received and are in good condition. If there are
missing or damaged elements, contact the Project Manager for instructions. The planning
documentation will list contact information for the Project Manager and other key personnel.
!
CAUTION:
Wear an anti-static wrist ground strap whenever handling components of an
CAUTION:
Avaya™ G150 Media Gateway. Connect the strap to an approved ground, such
as an unpainted metal surface.
If you have any questions about the equipment order, or if the equipment has been damaged,
contact your Project Manager. When you have verified that the order is complete and that you
have all of the necessary components and tools, proceed with the installation.
G150 Gateway Capacity
The G150 Media Gateway is supported with Avaya Communication Manager release 2.2 on the
Media Servers listed in the table below. This table also outlines the gateway capacity for each
media server.
Table 1: G150 Gateway Capacity for supported Media Servers
Supported
Media Servers
Maximum
Gateways
22 Installation and Configuration of the G150 Media Gateway
S8700/
S8500
S8710
250
250
S8300
G3si
(G700)
50
80
G3csi
80
Advertisement
Table of Contents
