Ani Digits Display - Nortel 1000 Features And Services Fundamentals

•

ANI Digits Display

The ANI digits are displayed on the display of the proprietary set or of the
attendant console. The ANI digits are displayed starting from the left side of
the display. The CAC display option is configured on the route data block
level and it may be set to one of the following options (see
Display options" (page
•
•
•
The CAC digit is separated from the ANI number by the minus sign. When
displaying ANI, there are several options available for CAC display. If ANI
request is repeated several times during a single call, each time new ANI
digits overwrite old ANI digits on the display. If the DN key that requested
the ANI information is placed on hold when the ANI digits arrive from the
CDTI2 card, the ANI digits are not displayed. In this case, when the call is
returned from hold, the ANI digits are displayed.
Figure 9
ANI Display options
Copyright © 1994–2008, Nortel Networks
.
Network (EURO), Q Signaling (QSIG), DPNSS - the ANI to CLID/OLI
mapping is based on the R2MFC CNI to CLID mapping.
CIS trunks - the ANI to ANI mapping is implemented in the framework
of the CIS ANI Digits Manipulation and Gateways Enhancements
feature described in this document. The ANI information that is
received from the incoming CIS DTI2 trunks is used by the CIS
Gateways Enhancements feature to compose the ANI information to be
downloaded to the outgoing CIS trunks.
479)):
display CAC before the ANI number
display CAC after the ANI number
do not display CAC
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature description 479
Figure 9 "ANI