Nortel 1000 Features And Services Fundamentals page 117

Trunk Barring
If an Originating Trunk Connection is forwarded to a barred route, it receives
the intercept treatment specified in the Customer Data Block.
Feature packaging
This feature is included in base system software.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
3.
LD 15 - Add/change a Call Forward Busy Incoming Call Indicator (ICI) on attendant consoles.
Prompt Response
REQ: CHG
TYPE: ATT_DATA
CUST
0-99
0-31
- ICI xx CFB
LD 10 - Allow/deny Call Forward Busy on analog (500/2500 type) telephones.
Prompt Response
REQ: CHG
TYPE: 500
TN
l s c u
Copyright © 1994–2008, Nortel Networks
.
"LD 15 - Add/change a Call Forward Busy Incoming Call Indicator (ICI)
on attendant consoles." (page 117)
Add/change a Call Forward Busy Incoming Call Indicator (ICI) on
attendant consoles.
"LD 10 - Allow/deny Call Forward Busy on analog (500/2500 type)
telephones." (page 117)
Allow/deny Call Forward Busy on analog (500/2500 type) telephones.
"LD 11 - Allow/deny Call Forward Busy on Meridian 1 proprietary
telephones." (page 118)
Allow/deny Call Forward Busy on Meridian 1 proprietary telephones.
Description
Change existing data.
Attendant console options
Customer number
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B
Add a Call Forward Busy ICI key; xx = 0-19.
Description
Change existing data.
Telephone type.
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 117