Nortel 1000 Features And Services Fundamentals page 181

Feature packaging
The Attendant Remote Call Forward (ARFW) package 253 must be
provisioned to activate the Attendant-based RCFW feature.
For network operation the following software packages are required:
•
•
•
The following are prerequisites for set-based RCFW:
•
•
•
The following are prerequisites for implementation on analog (500/2500
type) telephones:
•
•
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
3.
4.
5.
6.
Copyright © 1994–2008, Nortel Networks
.
Integrated Services Digital Network (ISDN) package 145
Network Alternate Route Selection (NARS) package 58
Any other trunk or dialing plan packages, as required by the customer's
configuration
Optional Features (OPFT) package 1
Flexible Feature Codes (FCC) package 139
Controlled Class of Service (CCOS) package 81
Special Service for 2500 Sets (SS25) package 18
500 Set Dial Access to Features (SS5) package 73
"LD 15 - Set the Station Control Password Length." (page 182)
Set the Station Control Password Length.
"LD 15 - Configure a Special Prefix Number (SPRE) for the customer."
(page 182)
Configure a Special Prefix Number (SPRE) for the customer.
"LD 57 - Define Remote Call Forward FFCs and set FFCT." (page 182)
Define Remote Call Forward FFCs and set FFCT.
"LD 10 - Set the Station Control Password and allow Call Forward."
(page 183)
Set the Station Control Password and allow Call Forward.
"LD 11 - Set the Station Control Password and allow Call Forward."
(page 183)
Set the Station Control Password and allow Call Forward.
"LD 12 - Configure the attendant console RFW key." (page 184)
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 181