Nortel 1000 Features And Services Fundamentals page 555

Conference Warning Tone
Enhancement
Contents
This section contains information on the following topics:
"Feature description" (page 555)
"Operating parameters" (page 556)
"Feature Interactions" (page 556)
"Feature packaging" (page 556)
"Feature implementation" (page 556)
"Feature operation" (page 558)
Feature description
The Conference Warning Tone Enhancement feature was developed to
meet the Italian requirements to distinguish between a conference warning
tone and a true intrusion. A Conference Warning Tone warns users that
they are involved in a conference connection. An Intrusion Tone warns
users involved in a conference of an intrusion into their connection.
Prior to this development, the Intrusion Tone was also used as a Conference
Warning Tone, and the two tones could only be distinguished by their
cadences, not by their tone frequency. With this feature, a separate
Conference Warning Tone can be defined, with its tone and cadence defined
in LD 56. This tone and cadence can only be programmed in Flexible Tones
and Cadences (FTC) table 0.
The Conference Warning Tone can be enabled or disabled using the CWFT
prompt in LD 97. When the tone is enabled, a permanent speech path
connection is placed from the tone circuit to the conference circuit to provide
the tone to all parties connected in a conference. The tone and cadence
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
555