Nortel 1000 Features And Services Fundamentals page 147

Slow Answer Recall
When a Call Forward No Answer call is unanswered at a telephone eligible
for Second Level Call Forward No Answer, and the call was extended by an
attendant, Second Level Call Forward No Answer takes precedence over
Slow Answer Recall. If the telephone has a Second Level Call Forward No
Answer Denied Class of Service, the system performs Slow Answer Recall
for the unanswered call.
Total Redirection Count
If a call has attempted Call Forward No Answer and was extended by the
attendant, the call will not be intercepted when the Total Redirection Count
limit has been exceeded. The call will continue to ring the telephone until
recalled to the attendant.
If Overflow (OVF), Busy (BSY), or Source (SRCx) is configured as Intercept
Treatments, a call attempting Call Forward No Answer, that exceeds the
Total Redirection Count limit, will not be intercepted. Further redirections
are prohibited and the call continues to ring the current telephone.
Trunk Barring
If an Originating Trunk Connection is forwarded to a barred route, it receives
the intercept treatment specified in the Customer Data Block.
Feature packaging
This feature is included in base system software.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
3.
Copyright © 1994–2008, Nortel Networks
.
"LD 15 - Assign Message Center to allow the Message Waiting
indication." (page 148)
Assign Message Center to allow the Message Waiting indication.
"LD 10 - Add/change Second Level Call Forward No Answer for analog
(500/2500 type) telephones." (page 148)
Add/change Second Level Call Forward No Answer for analog (500/2500
type) telephones.
"LD 11 - Add/change Second Level Call Forward No Answer for Meridian
1 proprietary telephones." (page 148)
Add/change Second Level Call Forward No Answer for Meridian 1
proprietary telephones.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 147