Nortel 1000 Features And Services Fundamentals page 462

462 CIS ANI Digits Manipulation and Gateways Enhancements
Prompt Response
X
- ADDG 0-(8)-99...99
- ANDN 0-99...99
X
LD 10 - Define ANI entry for analog (500/2500) sets.
Prompt Response
REQ: NEW
CHG
500
TYPE:
TN
l s c u
c u
CUST xx
... ...
xxxx ccc
DN
- MARP (NO) YES
aaaa
- CPND
aaaa
- VMB
Copyright © 1994–2008, Nortel Networks
.
Description
Remove LEC.
Additional digits used in ANI message if ANIC is NO or if
ANIC=YES but the ANI entry associated with the originator of
the call is not configured.
It is used to complete ANI DN if LEC+ANI DN consists of less
than ANSZ digits.
Prompted for outgoing CIS route.
It can be from 1 digit long up to ANSZ digit long.
Default ANI DN. It can be from 0 digit long up to ANSZ digit long.
Prompted for outgoing CIS route.
Used for building ANI message if ANIC=NO and DN of set is not
allowed to be sent (CLS DNAD).
Also used if ANIC=YES but the ANI entry associated with the
originator of the call is not configured, and DN of set is not
allowed to be sent (CLS DNAD).
Remove ANDN.
Description
Add new data.
Change existing data.
500 set.
Terminal number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
Customer number, as defined in LD 15
...
Directory Number, CLID entry.
Deny/Allow Multi Appearance Redirection Prime.
Calling Party Name Display.
Voice Mailbox.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008