Nortel 1000 Features And Services Fundamentals page 101

4.
On an analog (500/2500 type) telephone, the user accesses the Call
Forward All Calls and Internal Call Forward features by dialing either the
SPRE plus the feature code, or the appropriate Flexible Feature Codes
(FFCs). On a digital telephone, the user accesses each feature using its
feature key.
LD 15 - Define Class of Service for Call Forward All Calls.
Prompt Response
REQ: CHG
TYPE: RDR
CUST
0-99
0-31
- OPT (CFO) CFF
(PVCA) PVCD
- CFTA (NO) YES
- OPT (CFRD) CFRA
In LD 56, the XCT Tone Code (XCAD) default value is set to 0. If the XCAD
prompt is not changed in LD 56, an Analog 500-type telephone will not
receive Call Forward Reminder Tone (CFRT) even if it has been enabled in
LD 15 (OPT = CRFA).
LD 10 - Add/change Call Forward All Calls and Internal Call Forward for analog (500/2500
type) telephones.
Prompt Response
REQ: CHG
500
TYPE:
TN
l s c u
Copyright © 1994–2008, Nortel Networks
.
"LD 57 - Add/change Flexible Feature Codes for Internal Call Forward."
(page 103)
Add/change Flexible Feature Codes for Internal Call Forward.
Description
Change existing data.
Call Redirection.
Customer number.
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B.
(CFO) = Calling party Class of Service is active during Call
Forward All Calls.
CFF = Forwarding party Class of Service is active during Call
Forward All Calls.
Prevention of reciprocal Call Forward (allowed) or denied.
(Deny) allow telephones to Call Forward All Calls to a Trunk
Access Code.
Call Forward Reminder Tone (denied) allowed for analog
(500/2500 type) telephones.
Description
Change existing data.
Telephone type.
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 101