Nortel 1000 Features And Services Fundamentals page 302

302 Call Waiting/Internal Call Waiting
Night Service Enhancements
This feature will terminate incoming Night calls to busy DNs by applying
Call Waiting. This is done even if the Night DN is an analog (500/2500
type) telephone with Call Waiting Denied (CWD) Class of Service, or if
the Night DN is a Meridian 1 proprietary telephone without a Call Waiting
(CWT) key assigned.
All telephones (analog (500/2500 type) and Meridian 1 proprietary) is given
Night Call Waiting tone, if the NWT prompt in LD 15 was responded to with
"YES", regardless of the Warning Tone (WTA,WTD) Class of Service setting
of the set. Meridian 1 proprietary telephones is given Night Call Waiting
tone in the handset instead of the speaker buzz for Call Waiting.
On Hold on Loudspeaker
Call Waiting can be applied to a busy loudspeaker DN.
Ring Again
The user is notified that a previously busy line is free only when both the
original call and the waiting call have disconnected.
Station Camp-on
Call Waiting takes precedence over Station Camp-On.
Feature packaging
Call Waiting/Internal Call Waiting is included in base system software.
For Call Waiting FFCs, the following packages are required:
•
•
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
LD 10 - Allow Call Waiting for analog (500/2500 type) telephones.
Prompt Response
REQ: CHG
Copyright © 1994–2008, Nortel Networks
.
Background Terminal Facility (BGD) package 99
Flexible Feature Codes (FFC) package 139
"LD 10 - Allow Call Waiting for analog (500/2500 type) telephones."
(page 302)
Allow Call Waiting for analog (500/2500 type) telephones.
"LD 11 - Allow Call Waiting for Meridian 1 proprietary telephones."
(page 303)
Allow Call Waiting for Meridian 1 proprietary telephones.
Description
Change existing data.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008