Nortel 1000 Features And Services Fundamentals page 470

470 CIS ANI Digits Manipulation and Gateways Enhancements
Prompt Response
ANIE (0)-x
CISR YES
... ...
- CAC_CONV (0)-31
CAC_CIS 0-(3)-9
LD 16 - Configure the ANI table entry for all other route types (ISDN, incoming CIS analog,
incoming DTI2 and DPNSS).
Prompt Response
REQ NEW
TYPE RDB
... ...
ISDN YES
... ...
ICOG IAO
ICT
... ...
ANIE (0)-x
... ...
CAC_CIS 0-(3)-9
Copyright © 1994–2008, Nortel Networks
.
Description
ANI table Entry for Route (configured under prompt
R_ENTRY, OVL 15).
x = R_SIZE-1.
R_Size is the maximum table entry number that can be
configured. (R-SIZE is defined in OVL 15).
Default table entry is number 0.
CIS Route
...
CAC conversion table number for CIS-to-R2MFC gateway,
configured against CIS_ENT in CDB.
Prompted only for incoming CIS DTI2 route.
CIS ANI Category Code
Description
Add new data.
Route Data Block.
Enable ISDN
...
Incoming and outgoing.
Incoming.
ANI table Entry for Route (configured under prompt R_ENTRY,
LD 15).
x= R_SIZE-1.
R_Size is the maximum table entry number that can be
configured.
...
CIS ANI Category Code
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008