Nortel 1000 Features And Services Fundamentals page 437

Prompt Response
c u
...
FTR OSP (1)
OSP 2
XOSP
LD 10 - Enable hook flash disconnect supervision.
Prompt Response
REQ: NEW CHG
TYPE: 500
TN
l s c u
c u
...
FTR ISP 1...(75)...255
XISP
Respond to the FTR prompt in LD 10 with OSP 1, and then with ISP
1...(75)...255 to enable both battery reversal supervision and hook flash
disconnect supervision.
Feature operation
No specific operating procedures are required to use this feature.
Copyright © 1994–2008, Nortel Networks
.
Description
Format for Small System and Media Gateway 1000B where
c = card and u = unit.
Outgoing call supervision. Answer and disconnect
supervision for outgoing calls with absolute and assumed
answer indication. If the numeric parameter is not entered
and the saved value is null, it is defaulted to 1. Otherwise it
remains unchanged.
Answer and disconnect supervision for outgoing calls with
absolute answer supervision only.
Enter XOSP to disable battery reversal answer and
disconnect supervision.
Description
Add, or change.
Telephone type.
Terminal number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where
c = card and u = unit.
Enable hook flash disconnect supervision with flash timer
in 10 millisecond units. If the numeric parameter is not
entered and the saved value is null, it is defaulted to 75.
Otherwise it remains unchanged.
Enter XISP to disable hook flash disconnect supervision.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature operation 437