Nortel 1000 Features And Services Fundamentals page 459

9.
10.
11.
12.
13.
LD 15 - Configure ANI Table for telephones
Prompt Response
REQ: NEW
CHG
TYPE: ANI
... ...
xx...xx
ANLD
CIS_ANI YES (NO)
Copyright © 1994–2008, Nortel Networks
.
"LD 15 - Configure the ANI route table and CAC conversion table."
(page 466)
Configure the ANI route table and CAC conversion table.
"LD 16 - Configure the ANI table entry in the Route Data Block for
incoming R2MFC route." (page 469)
Configure the ANI table entry in the Route Data Block for incoming
R2MFC route.
"LD 16 - Configure the ANI table entry and CAC conversion table for
Incoming CIS DTI2 route." (page 469)
Configure the ANI table entry and CAC conversion table for Incoming
CIS DTI2 route.
"LD 16 - Configure the ANI table entry for all other route types (ISDN,
incoming CIS analog, incoming" (page 470)
Configure the ANI table entry for all other route types (ISDN, incoming
CIS analog, incoming DTI2 and DPNSS).
"LD 88 - Configure the CAC for CIS signaling." (page 471)
Configure the CAC for CIS signaling.
Description
Add new data.
Change existing data
Automatic Number Identification
...
ANI listed directory number (for North American trunk)
CIS ANI option.
If CIS_ANI=YES, the next sub-prompts is prompted, allowing the
configuration of ANI entries for CIS ANI message composing.
If CIS_ANI=NO, the following sequence of subprompts is
skipped.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 459