Nortel 1000 Features And Services Fundamentals page 599

LD 11 - Change CCOS controlling telephone assignments on Meridian 1 proprietary telephones.
Prompt Response
REQ: CHG
a...a
TYPE:
TN
l s c u
c u
KEY xx COS
Feature operation
To activate CCOS, follow these steps:
Step
1
2
3
To deactivate CCOS, follow these steps:
Step
1
2
3
Copyright © 1994–2008, Nortel Networks
.
Description
Change.
Telephone type. Type ? for a list of possible responses.
Terminal number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
Assign CCOS controlling key.
Action
Press CCOS.
Note that this is a toggle: If CCOS is already active, pressing the key
will change the CCOS state to inactive. Check the CCOS lamp to
determine if CCOS is already active.
Dial the Prime Directory Number (PDN) of the telephone to be
changed and press CCOS.
Press Rls.
Action
Press CCOS.
Dial the PDN of the telephone to be returned to its original Class of
Service and press CCOS.
Press Rls.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
—End—
—End—
Feature operation 599