Nortel 1000 Features And Services Fundamentals page 426

426 China - Flexible Feature Codes
3.
LD 57 - Configure Flexible Feature Codes for Busy Number Redial.
Prompt Response
REQ CHG
TYPE FFC
xx
CUST
FFCT (NO) YES
CODE
xxxx
- DEAF
xxxx
- BNRA
xxxx
- BNRD
LD 15 - Set the Autodial Delay time used by Busy Number Redial.
Prompt Response
REQ: CHG
TYPE: FFC
CUST
0-99
0-31
- ADLD (0)-20
LD 10 - Allow Busy Number Redial for analog (500/2500 type) telephones.
Prompt Response
REQ: CHG
TYPE: 500
TN
l s c u
c u
Copyright © 1994–2008, Nortel Networks
.
Set the Autodial Delay time used by Busy Number Redial.
"LD 10 - Allow Busy Number Redial for analog (500/2500 type)
telephones." (page 426)
Allow Busy Number Redial for analog (500/2500 type) telephones.
Description
Change existing data.
Flexible Feature Codes.
Customer number, as defined in LD 15
Flexible Feature Confirmation Tone.
Change code.
Deactivate Feature.
Busy Number Redial activation code.
Busy Number Redial deactivation code.
Description
Change existing data.
Flexible Feature Codes
Customer number
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B.
Number of seconds to delay before auto-dialing the saved
busy number (0 will make the feature unavailable). Odd
entries are rounded up to the next even number.
Description
Change existing data.
Telephone type.
Terminal number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where
c = card and u = unit.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008