Nortel 1000 Features And Services Fundamentals page 483

Prompt Response
FEAT LPTI
CDTI2 YES
... ...
CISFW MFA
- MFSL (0)-3
- 500L (0)-1
LD 14 - Add Calling Number Identification Allowed (CNA) as a class of service for incoming
Direct Inward Dial (DID) CIS DTI2 trunks.
Prompt Response
REQ NEW
CHG
TYPE DID
... ...
CLS
CNA
LD 16 - Define the CIS Route.
Prompt Response
REQ NEW
CHG
Copyright © 1994–2008, Nortel Networks
.
Description
Loop Timers and additional definitions.
CDTI2/CSDTI2 card
Multifrequency Shuttle protocol handling + ANI Reception +
Firmware Dial Tone Detection capabilities are supported by the
card.
The MFS signals transmission level. The prompt appears when
CISFW is set to MFS or MFA and the CISMFS package is
equipped.
The transmission level may be set to the following values:
0 = -7.3 dB
1 = -5.0 dB
2 = -3.5 dB
3 = 0 dB
ANI request tone (500 Hz) transmission level. The prompt
appears when CISFW is set to MFA.
The transmission level may be set to the following values:
0 = -7.3 dB
1 = -3.5 dB
Description
Add new data.
Change existing data.
Direct Inward Dial trunks.
...
Class of Service.
Allow Calling Number Identification for incoming CIS DTI2 DID
trunks.
Description
Add new data.
Change existing data.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 483