Nortel 1000 Features And Services Fundamentals page 505

Book 2 of 6 (c)

Hide thumbs Also See for 1000:

Table of Contents

General engineering guidelines for non-Call Center applications

In a non-call center application, there is no signiﬁcant number of agent sets.

Therefore, no agent set to regular set conversion is needed. The only type

of port requiring special treatment is trunk.

Conﬁgurations following engineering rules (no re-conﬁguration

required) The following engineering rules should be followed to avoid the

need to re-conﬁgure a switch to accommodate the CLASS feature.

1. Provide the number of CMOD units serving all CLASS sets in the system

2. Equip all CLASS sets in one network group.

3. Equip the XCMC IPE pack on the network group with CLASS sets.

If the system is a single group system, or if above rules are fully met, no

further engineering is necessary. However, in case of an existing multi-group

site upgrading to provide CLASS feature, we may need to re-conﬁgure the

system in order to satisfy rule (2).

based on the capacity table

Nortel Communication Server 1000

Features and Services Fundamentals — Book 2 of 6 (C)

NN43001-106 02.04 Standard

Release 5.5 9 May 2008

(Table 10 "CMOD unit capacity" (page

Feature description 505

Chapters

Table of Contents