Call Forward All Calls; Contents; Feature Description - Nortel 1000 Features And Services Fundamentals

Call Forward All Calls

Contents

This section contains information on the following topics:
"Feature description" (page 89)
"Operating parameters" (page 90)
"Feature interactions" (page 91)
"Feature packaging" (page 100)
"Feature implementation" (page 100)
"Feature operation" (page 103)

Feature description

Call Forward All Calls (CFW) automatically forwards incoming calls to
another destination, within or outside the system. Only calls to the Prime
DN or any single-appearance DN on the telephone are forwarded. Outgoing
calls can still be placed from the telephone when Call Forward is active.
Call Forward All Calls can be selectively activated depending on the source
of the originating party. With the Internal Call Forward (ICF) feature, the
user can cause only internal calls to be forwarded. The Call Forward
Reminder Tone (CFRT) presents special dial tones on analog (500/2500
type) telephones with CFW active. One tone indicates that CFW is active;
a second indicates that there is a message waiting for the telephone with
CFW active.
Call Forward All Calls, as well as Internal Call Forward, is assigned on a
per-telephone basis. Meridian 1 proprietary telephones must be equipped
with separate key/lamp pairs to allow the activation and deactivation of
each feature. Customers can specify the length of the destination number
in LD 11. Options are 4, 8, 12, 16, 20, or 23 digits. If you enter another
number for the length, the system rounds to the nearest acceptable choice.
The default is 16 digits.
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
89