Nortel 1000 Features And Services Fundamentals page 425

LD 15 - Define the basic setup for all three of the FFC-based features.
Prompt Response
REQ: CHG
TYPE: FFC
CUST
0-99
0-31
- FFCS (NO) YES
1-3
- STRL
xxx
- STRG
REQ CHG
TYPE FTR
nnnn
- SPRE
LD 56 - Define Confirmation Tone.
Prompt Response
REQ CHG
TYPE FTC
TABL 0-31
HCCT YES
...
- FFCT
- - XTON 0-(4)-255
- - XCAD (0)-255
Busy Number Redial
Task Summary List
Complete the following steps to configure the Busy Number Redial feature:
1.
2.
Copyright © 1994–2008, Nortel Networks
.
Define Confirmation Tone.
Description
Change existing data.
Flexible Feature Codes
Customer number
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B.
(Do not) change Flexible Feature Code end-of-dialing
indicator.
String Length of end-of-dial indicator.
String to indicate end-of-dialing. Up to three digits as
defined by STRL. Digits 0-9 and "#" are valid entries.
Change.
Features and options.
Special Function Prefix (required for FFCs to operate).
Description
Change existing data.
Flexible Tones and Cadences.
FTC Table Number.
Hardware controlled cadences and tones.
Configure Confirmation Tone.
XCT (NT8D17 Conference/TDS) Tone code.
XCT (NT8D17 Conference/TDS) Cadence number (FCAD
cadence number).
"LD 57 - Configure Flexible Feature Codes for Busy Number Redial."
(page 426)
Configure Flexible Feature Codes for Busy Number Redial.
"LD 15 - Set the Autodial Delay time used by Busy Number Redial."
(page 426)
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 425