Nortel 1000 Features And Services Fundamentals page 107

Feature interactions
Attendant and Network-Wide Remote Call Forward
When the call forward status of a BFS station is changed from a telephone or
attendant-based Remote Call Forward feature, the BFS lamp(s) associated
with that station are updated accordingly.
Attendant Blocking of Directory Number
The Attendant Blocking of DN feature will override these Call Forward
and Busy Status. If the dialed DN of the telephone is idle, the DN can be
blocked; if the DN is busy, busy tone is heard.
Autodial
Party A can use the Busy/Forward Status key as an Autodial key to dial
Party B.
Call Forward All Calls
Call Forward All Calls must be assigned to Party A's telephone to enable
the Call Forward Status function, which allows Party B to monitor and alter
the Call Forward state of Party A's telephone.
Call Forward/Hunt Override Via Flexible Feature Code
Call Forward and Busy Status is overridden by the Call Forward/Hunt
Override Via FFC feature, but there are no changes to the feature itself.
Call Forward, Remote (Attendant and Network-Wide)
When the call forward status of a BFS station is changed from a telephone or
attendant-based Remote Call Forward feature, the BFS lamp(s) associated
with that station are updated accordingly.
Calling Party Privacy
If an incoming ISDN trunk call with the Privacy Indicator is forwarded, the
Privacy Indicator is tandemed to the far end to inhibit the display of the
Calling Party Name or Number provided that the outgoing trunk route on the
tandem node also has CCP provisioned.
If an incoming non-ISDN trunk call is forwarded to a trunk, the outgoing
trunk call from the tandem node will carry the Privacy Indicator if the
outgoing trunk route on the tandem node has the TCPP option set.
The CCP code can also be stored on the forwarding DN. If the CPP is
requested on the forwarding DN, the Privacy Indicator is outpulsed to the
terminating node to inhibit the number of the forwarding telephone (that is,
at the tandem node) from being displayed on the terminating telephone. In
this case, the forwarding station must include the CPP in the forwarding DN
(such as *67 + ACOD + the DN on the terminating node).
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature interactions 107