Nortel 1000 Features And Services Fundamentals page 589

Feature operation
The following table identifies what is displayed on the IP Phone LCD screen
when in a specific call state.
Table 14
Call state screens
Call state
Default Idle
Dial Tone
Predial
Dialing
Ringing
Busy
Copyright © 1994–2008, Nortel Networks
.
Action
Key map download message is sent
to the telephone and the default idle
state appears.
Lift the handset or press the line
(DN) key to get a dial tone. The dial
tone screen appears.
Press the dialpad from the idle state
to advance the display to the predial
screen.
There are no soft keys needed.
The calling telephone receives
ringback tone from the called
telephone.
If the destination number is busy,
the display advances to the busy
state screen.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature operation 589
Display
For IP Phone 2001, 2002, 1110,
1120E, and 2033, the default idle
state is Fwd Caller Redial
For IP Phone 2004, 2007, 2050,
1140E, and 1150E, the default
idle state is Forward Callers
Redial
For WLAN Handsets 2210, 2211,
and 2212, there are only four
characters available for each soft
key label.
Note: Depending on your
telephone type and the number
of characters available for each
soft key label on the LCD screen,
some soft key labels can appear
differently than what is identified
in this document. For example,
Forward appears as Fwd on an IP
Phone 2001 with a six- character
soft key label.
SpcUsr Pickup Charge CParty
CLEAR DELETE CANCEL
Extension number is displayed.
Extension and calling name are
displayed. For example, 7466
John Smith
Destination Busy
Activate RING AGAIN?
RingAgn