Nortel 1000 Features And Services Fundamentals page 242

242 Call Party Name Display
Prompt Response
xx
- XPLN
<CR>
DCNO xxx
nnn
IDC
NAME aaaa bbbb
LD 10 - Allow names to be assigned to analog (500/2500 type) telephones.
Prompt Response
REQ: CHG
500
TYPE:
TN
l s c u
c u
FTR CPND
LD 11 - Allow names to display on Meridian 1 proprietary telephones.
Prompt Response
REQ: CHG
a...a
TYPE:
TN
l s c u
c u
CLS (CNDD) CNDA
(DNDD) DNDA
LD 12 - Allow names to display on attendant consoles.
Prompt Response
REQ: CHG
Copyright © 1994–2008, Nortel Networks
.
Description
Expected Length.
Range must be between the Input Name length and the MXLN,
or it defaults to DFLN.
Set XPLN to average default character string length (DFLN) or
the actual length (NAME), whichever is longer.
IDC conversion table number (0-254).
Existing complete or partial IDC number.
Prompted only when DCNO is valid.
CPND name string; maximum of 27 characters.
Description
Change existing data.
Telephone type.
Terminal number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
Allow CPND name assignment on this telephone.
Description
Change existing data.
Telephone type. Type ? for a list of possible responses.
Terminal number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
(Deny) allow display of CPND entries.
(Deny) allow display of CPND originally dialed entries.
Description
Change existing data.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008