Nortel 1000 Features And Services Fundamentals page 337

Book 2 of 6 (c)
Table of Contents

Advertisement

Configuration procedures require that the following conditions are met
before you configure Privacy Override Indicators for a Non-ISDN route:
LD 16 - Configure Privacy Override Indicators for a Non-ISDN route.
Prompt
Response
REQ
CHG
TYPE
RDB
xx
CUST
ROUT
0-511
0-127
...
CPP
YES
- TCPP
(NO)
YES
- DTPI
(*67) nnnn
- DPPI
0-(1167)-9999
- DTPO
(*82) nnnn
- DPPO
0-(1182)-9999
Configuration procedures require that the following conditions are met before
you set the TCPP flag in RDB to tandem non-ISDN calls on to this route:
LD 16 - For an ISDN trunk route, set the TCPP flag in RDB to tandem non-ISDN calls on to
this route.
Prompt
Response
REQ
CHG
TYPE
RDB
Copyright © 1994–2008, Nortel Networks
.
CPPO is configurable on COT, DID, FEX, WAT and ISA routes.
OAPO package 104 is restricted or unequipped.
Route is either OGT (outgoing) or IAO (incoming and outgoing).
Description
Change existing data.
Route Data Block.
Customer number, as defined in LD 15
Route number
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B.
Calling Party Privacy/Privacy Override (CPP/CPPO) flag.
Enable CPP/CPPO feature and configure parameters.
(NO) = CPP/CPPO feature is disabled is the default.
CPP/CPPO flag treatment for an incoming non-ISDN trunk call
tandemed to this trunk route.
Outgoing call will carry the Privacy Override Indicator (default).
Outgoing call will carry the Privacy Indicator.
Digitone Trunk Privacy Indicator
nnnn = 0-9999, an asterisk (*) can be entered as the first digit.
Dial-pulse Trunk Privacy Indicator
Digitone Trunk Privacy Indicator
nnnn = 0-9999, an asterisk (*) can be entered as the first digit.
Dial-pulse Trunk Privacy Indicator
The CPP package 301 is equipped.
Route is either OGT (outgoing) or IAO (incoming and outgoing).
Description
Change existing data.
Route Data Block.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 337

Advertisement

Table of Contents
loading

Table of Contents