Nortel 1000 Features And Services Fundamentals page 249

Conference
This feature cannot be activated during a conference call. Meridian 1
proprietary telephones can activate Call Pickup if an idle Directory Number
(DN) key is available. The conference call must be put on hold before
pressing the idle DN key to pick up the call.
Dial Intercom
Call Pickup may be used by Meridian 1 proprietary telephones if the
telephones are all in the same Dial Intercom Group (DIG) and Call Pickup
Group and the ring option is specified for the DIG
Digital Private Network Signaling System (DPNSS1)/Digital Access
Signaling System (DASS2) Uniform Dialing Plan (UDP) Inter-working
Call Pickup is supported in a DPNSS1 UDP network.
Display of Calling Party Denied
When a call is picked up from another set, the terminating set's display
is in accordance with the Class of Service of the dialed and calling sets.
The calling party's display includes the dialed DN, the terminating DN and
the name of the terminated set. However, if the terminating set has Digit
Display Denied (DDGD), then both the dialed and terminating sets' DNs
are blocked from the calling party's display. The same occurs when Digit
Display Allowed (DDGA) is configured on the terminating set. Both the
dialed and terminating sets' DNs are displayed on the calling party's set,
regardless of the Class of Service of the dialed set.
Flexible Feature Codes
Flexible Feature Codes are not supported on a Meridian 1 proprietary
telephone during an attempt to pick up a Dial Intercom ringing call.
Group Call
This feature can be used to answer a Group Call if it is activated by a valid
telephone in the same Call Pickup group, or by using Directory Number
(DN) Pickup or Group Pickup.
Hot Line
Telephones with two-way Hot Line keys, and analog (500/2500 type) Hot
Line telephones, can be assigned to pickup groups. Incoming Hot Line calls
may be picked up by group members. To prevent someone from picking up
a Hot Line call, do not put the Hot Line user into a Call Pickup group.
ISDN QSIG Name Display
An incoming QSIG call with name display presentation allowed has name
information displayed on the set that picks up the call. If the incoming QSIG
call has presentation denied, the calling party's name is not displayed on
the set picking up the incoming call.
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature interactions 249