Nortel 1000 Features And Services Fundamentals page 469

LD 16 - Configure the ANI table entry in the Route Data Block for incoming R2MFC route.
Prompt Response
REQ NEW
TYPE RDB
... ...
MFC YES
x
- MFCI
x
- MFCO
... ...
ICOG IAO
INC
NCNI 1
ANIE (0)-x
CAC_CONV (0)-31
LD 16 - Configure the ANI table entry and CAC conversion table for Incoming CIS DTI2 route.
Prompt Response
REQ NEW
TYPE RDB
... ...
DGTP DTI2
... ...
ICOG INC
... ...
Copyright © 1994–2008, Nortel Networks
.
Description
Add new data.
Route Data Block.
...
Configure Multifrequency Compelled signaling.
MFC Incoming Table.
MFC Outgoing Table.
Incoming and Outgoing.
Incoming.
Request CNI after the defined number of digits are
received. CNI is requested during incoming MFC call after
the first digit of dialed number has been received.
ANI table Entry for Route (configured under prompt
R_ENTRY, OVL 15).
x = R_SIZE-1.
R_Size is the maximum table entry number that can be
configured. (R-SIZE is defined in LD 15).
CAC conversion table number for CIS Gateway. Configured
against MFC_ENT in LD 15.
Prompted only for non "outgoing only" R2MFC route.
Description
Add new data.
Route data block
...
2 Mbit Digital Trunk Interface.
Incoming route.
...
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 469